Auto unscrew naliti ukungunda Ubushushu obuphezulu ngundo |Ngelanga

Ukukhulula ngokuzenzekelayo ukwenza umngundo & nobushushu obuphezulu bokubumba iPPSU imathiriyeli obonisiwe Umfanekiso

Inkcazelo emfutshane:

• I-4 cavity, izinto ze-PPSU

• ubushushu obuphezulu beplastiki yokungunda inaliti, i-auto-unscrew mold.

• Sinamava eminyaka okwenza umngundo wokungunda ngokuzenzekela kunye nokungunda kobushushu obuphezulu

• Kwimathiriyeli yePPSU, iqondo lobushushu lokungunda linokufikelela kwi-160 ~ 180 degree

• Ukungunda okuchanekileyo okuphezulu kunye nokunyamezela ngaphantsi kwe +/-0.02mm

Thumela i-imeyile kuthi

Iinkcukacha

Iithegi zeMveliso

Intshayelelo yeMveliso

Inayiloni-30GF-auto-unsccrewing-mold-min_副本

• Ubushushu obuphezulu beprojekthi yokukhulula i-auto inobushushu obuyi-160 degree kunye ne-resin ye-380 degree.

• Lo mjikelo u-4 wokungunda unexesha elipheleleyo lomjikelo wemizuzwana engama-35 kunye nentshukumo egudileyo yokukhulula.

• Inxalenye lunyamezelo oluphezulu olungaphantsi+/-0.02mm.

• Amalungu asetyenziswa kwizixhobo zesixokelelwano samanzi anzulu olwandle.

Ipharamitha yetyala le-auto yokukhulula inaliti yokungunda?

Isishwankathelo

IsiXhobo kunye noHlobo		Iimveliso zesistim yamanzi zikhupha i-auto 4 i-cavity mold, izinto ze-PPSU, i-mold yobushushu obuphezulu
Igama lenxalenye		MINI PIston
Intlaka		I-PPSU
Inani lomgodi		1*4
Isiseko sokungunda		I-LKM S50C
Intsimbi yomngxunya&Core		H-13 HRC48-50 /H-13 HRC48-50
Ubunzima besixhobo		430KG
Ubungakanani besixhobo		493X454X440
Cofa iTon		120T
Ubomi bokungunda		800000
Inkqubo yokutofa		Umngundo imbaleki ebandayo
Inkqubo yokupholisa		160 ℃
Inkqubo yokukhupha		ukukhulula ngemoto kunye nevili legiya
Amanqaku akhethekileyo		iqondo lobushushu ngundo 160 ℃, ubushushu bento 380 ℃
Ubunzima		unscrew agudileyo kakhulu, ixesha umjikelo 39'S, unyamezelo +/-0.02mm.
Ixesha lokukhokhela		Iiveki ezi-5
Iphakheji		Iphepha le-Anti-rust kunye nefilimu, ioli encinci ye-anti-rust kunye nebhokisi yeplywood
Ukupakisha izinto		Ukuqinisekiswa kwentsimbi, i-2D yokugqibela kunye noyilo lwesixhobo se-3D, uxwebhu lwembaleki eshushu, iindawo ezisecaleni kunye nee-electrode...
Ukuncipha		1.007
Ukugqitywa komphezulu		B-2
Imiqathango yorhwebo		FOB Shenzhen
Thumela ngaphandle		Ostreliya

Ukuzikhulula ngokuzenzekela iPPSU Mold- Ixesha leLanga-min (1)

Iinkcukacha ezingakumbi

• Isixhobo sokungunda inaliti siyazikhulula ngemoto kunye nevili legiya.

• Zininzi iipleyiti zokugquma kumngundo kumacala amane njengoko ubushushu bokungunda buphezulu kakhulu.

• Le 4 yecavity mold inexesha elipheleleyo lomjikelo wokubumba imizuzwana engama-35 kwaye ukunyamezela inxalenye kungaphantsi kwe +/-0.02mm.

Cela iQuote ngoko nangoko

Izinto malunga ne-auto-unscrewing injection mold

Yintoni ukubumba inaliti yokukhulula?

I-auto unscrew molding injection molding yinkqubo edibanisa ukubunjwa kwenaliti yezinto zeplastiki kunye ne-automatic unscrew kunye nokususwa kwemisonto ye-screw (yangaphandle okanye yangaphakathi okanye zombini) kwiindawo ezibunjiweyo.

Le nkqubo isetyenziselwa amacandelo okuvelisa afana nezibiyeli, amaqhina, iziqhoboshi, iikepusi, iivalvu kunye nokunye.

I-auto-unscrewing injection mold iquka ipleyiti yesprue kunye nepleyiti engundoqo kunye nesixhobo somsonto we-screw esivumela ukukhulula ngokuzenzekelayo emva kokuba indawo ipholile.

Le nkqubo iphelisa imfuno yokususwa kwencwadana ye-threaded parts njengoko isenziwa ngokuzenzekelayo xa inxalenye ikhutshiwe kwi-mold cavity.

Izinto eziluncedo zokubumba inaliti yokukhupha i-auto-unscrewing ibandakanya ukongiwa kweendleko ngenxa yeendleko ezincitshisiweyo zabasebenzi, umgangatho wemveliso ophuculweyo kuba kukho ukuphathwa ngesandla okuncinci okubandakanyekayo, ukhuseleko oluphuculweyo kuba luphelisa naziphi na iimpazamo zabantu ekususeni izikrufu, kunye nokuphindaphindwa okuphindaphindwayo kunye nokungaguquguquki ngenxa yeyunifomu. inkqubo ezenzekelayo.

Ukongeza, le nkqubo ingasetyenziselwa ukwenza iinxalenye ezinejiyometri entsonkothileyo njengemisonto emininzi yangaphakathi okanye izikrufu ze-countersunk ngaphandle kwamanyathelo okuqhubela phambili afunekayo emva koko.

Ingxelo yoyilo

Uyilo lokungunda lwe-3D

Uyilo lokungunda lwe-auto unscrew mold

Ukuyila i-auto unscrew mold naliti kufuna ukuqwalaselwa ngononophelo kwemveliso, imathiriyeli yeplastiki, kunye nobungakanani besixhobo.Ezona zisombululo zixhaphakileyo zokungunda kwenaliti yokukhulula i-auto zibandakanya i-core insert drive nge-rotary, i-rack, okanye i-worm.

Xa uyila i-auto unscrew mold injection mold, kubalulekile ukuqwalasela izinto eziphathekayo zemveliso, ububanzi bentambo kunye nobude, ubukhulu bodonga kunye ne-shrinkage ebalwayo, uhlobo lweplastiki kunye nezigcwalisi ezisetyenziswe kwi-injection mold.Ukongezelela, i-mold-action mold ingaba yimfuneko ukuxazulula iingxaki ezithile ezivela xa uvula kwaye uvala i-mold.Ukukhawulezisa ixesha lomjikelo ngokumangalisayo ngelixa uphumeza iziphumo ezisemgangathweni, iimolds zokuzikhulula ngokuzenzekelayo zihlala zisetyenziswa.

Kukho iindidi ezi-2: ukukhulula ngesandla (i-demold by force) kunye nokukhulula ngokuzenzekelayo.I-Manual unscrewing inemveliso ephantsi, kodwa isakhiwo sokubumba silula kwaye sifanelekile kwimveliso encinci yebhetshi;ukukhutshwa okuzenzekelayo kunokusebenza okuphezulu kunye nomgangatho ozinzile kwaye kufanelekile kwimveliso enkulu yebhetshi.Kwi-automatic unscrew mold structure, iingxaki zokuthembeka, ukuzinza kunye nokusebenza koyilo lwesakhiwo kufuneka zisonjululwe.

• Uhlalutyo lwamalungu eplastiki: Uhlalutyo lwe-DFM ukukhangela iindawo zezixhobo kunye nokufumana isisombululo esinokonga nesona sisebenzayo.

• Khetha inkqubo yembaleki: ukuba umthamo wemveliso mkhulu kwaye umgangatho kufuneka ube phezulu, imbaleki eshushu (njengesango levalvu) isengqiqweni kwaye iluncedo.

• Ukupholisa:

Ukuze kuphuculwe ukusebenza kakuhle kwemveliso, ukuthintela ukuguqulwa kwamacandelo eplastiki, kunye nokuthintela ukunamathela kwisigxina esibangelwa ukwanda kwe-thermal ye-mold parts, inkqubo yokupholisa i-mold kufuneka ibe yinto eyaneleyo kwaye inokwethenjelwa.

• Ukukhetha izinto zokubumba: ngokuqhelekileyo, sikhetha izinto zokubumba ezinokumelana nokunxiba okuphezulu kunye nezixhobo ezilukhuni.Kule projekthi, sasebenzisa intsimbi ye-H13.

• Uyilo lwenxalenye yeMold drive: ngokuqhelekileyo kukho iindlela ezi-3 zokuyila indawo yokuqhuba, eyiHydraulic cylinder + rack, Motor + Chain kunye neRack + Gears.

Abaqulunqi bethu basebenza kakuhle kakhulu, kwi-DFM, igqitywe ngeentsuku ze-2, njengoko iprojekthi ingxamiseke kakhulu, ngoko abathengi kufuneka benze uyilo lwe-3D ngokuthe ngqo, akukho mfuneko yokwenza i-2D layout, ngoko ke i-3D yagqitywa kwiintsuku ze-3.

Sinabayili aba-6 abanamava angaphezulu kweminyaka esi-8 endlwini.Kwaye sinamaqabane oyilo anobuchule kwaye kuphela kuyilo kunye neshishini loyilo lokubumba njenge-backup xa uvuma ukuba usivumele ukuba sicele uncedo.

FAQ

Ukwenziwa kwe-auto-unscrewing injection mold making

1. Lithini iqondo lobushushu lokungunda kwesi sikrolo sokungunda inaliti yePPSU?

Ubushushu bomngundo yi-160 ~ 180 degree.

2. Kuthekani ngonyamezelo lwala malungu a-4 emigqonyeni ukusuka kumngundo ongaqhawukiyo?

Ukungunda: +_0.01mm,

Inxalenye yePlastiki: +_0.02mm

Machining imveliso: +_0.005mm.

3. Zeziphi imathiriyeli odla ngokuzisebenzisa kwisitofu seplastiki kunye nesingundo sokuphosa?

Ukubumba inaliti yeplastiki, sisebenzisa izinto zeplastiki ezibandakanya iPPSU, PEEK, ABS, PC, PC+ABS, PMMA, PP, HIPS, PE(HDPE,MDPE,LDPE).PA12, PA66, PA66+Glass fiber,TPE,TPR,TPU,PPSU, LCP,POM,PVDF,PET,PBT...

Kwaye ukuphosa ukufa, imathiriyeli ye-aluminiyam idla ngokuba yi-A380, A356,6061.

4. Leliphi ixesha elikhokelayo lokuyila isitofu sokungunda kwi-Suntime Precision Mould?

DFM: Ngesiqhelo kwintsuku ezi-2 zokusebenza.
Uyilo lokungunda lwe-2D: Ngesiqhelo Phakathi kwe-3-4 yosuku lokusebenza.
Umzobo we-3D wokubumba: Ngokuqhelekileyo Phakathi kwe-4-5 yosuku lokusebenza.

5. Ifumaneka phi iSPM njengomthengisi wokwenza izixhobo?

Umzi-mveliso wethu useChang Idolophu yaseDong Guan City kumazantsi eTshayina, indawo yokuqala yokuvelisa ukungunda.Imizuzu eli-10 ukuya eShen Zhen.Imizuzu engama-30 ukuya kwisikhululo seenqwelomoya saseShen Zhen.

6. Kuthekani ngesakhono soNxibelelwano seqela leSPM?

a).Iintengiso ezityebileyo ezinamava kunye neenjineli zilandela iprojekthi kwaye zinxibelelana ngesiNgesi esinezakhono.

b).24/7 inkonzo yesimbo.Ulawulo lweprojekthi enye ukuya kwenye.

c).Yiza ukutyelela nanini na kwaye iqela leSuntime lindwendwela abathengi ngonyaka.

d).ingxelo yeveki rhoqo ngoMvulo.(iingxelo ezi-2 ngeveki ukuba ziyimfuneko).

e).Naziphi na ii-imeyile ziphendula kwiiyure ezingama-24, ungasitsalela umnxeba nanini na, nasezinzulwini zobusuku.